Abs pump how does it work

Rotation sensors —provide information to the ABS module when one of the wheels begins to brake. Valves - there is a valve in the piping of each brake controlled by the ABS module, responsible for lowering the brake pressure.

Pump - has the function of resetting the brake pressure after valve to decrease. ABS Control Unit - responsible to check the rotation sensors and control the valves. The wheel might start to turn. This can create a brake-pull condition. This will release or bleed off the hydraulic pressure that is holding the wheel. The wheel will now rotate. Since pressure from the master cylinder has been bled off, the pump in the ABS modulator will spool up and apply pressure.

The outlet valve is closed and the inlet valve is opened. The pump applies pressure to the wheel. If the wheel is still outside the wheel slip parameters, the cycle will start over. Unresponsive Brake Pedal : If your brake pedal is not as responsive as it used to be, or it takes longer to depress, this can indicate that you have an issue with your pump. Do not leave it until your brake pedals become completely unresponsive, as this is a danger to yourself and other road users.

Forceful Braking : You may find that when you put your foot down on your brake pedal, it requires more force than usual, or that a lighter braking manoeuvre no longer works when you try and stop the vehicle.

Having a hard brake pedal is not adequate for safe driving, and your braking distance will be affected as the pressure sensor may be faulty. Brakes Locking Up : If your brakes are locking up when you driving normally, then there is an issue with your ABS pump. With this issue, you should immediately get it checked by a professional, especially if you start to hear strange clicking noises. Speedometer : On rare occasions, the speedometer will show that you are doing 0MPH, or will show you incorrect speeds when you are driving.

Usually, this issue is accompanied by the check engine light or the ABS light coming on when you start your engine. However, if you experience this problem and there are no lights illuminated on your dashboard, you should still get your vehicle inspected by a professional. The units we provide exceed OE specifications and they come with a lifetime warranty!

If you have any questions, you can call us on Of late it does not release the auto lock. I took the car to the VW agent but they have not been able to identify the problem. Recently it was suggested that I may have to buy a new abs pump even though there is no evidence that the problem is caused by the pump. How can you assist in such a case?

The other issue is that there is no signal on the dashboard that the brakes are faulty. Even the diagnostic test by the agent does not indicate that there is a fault with the brakes. We can test the ABS unit and simulate it running as if it were on the vehicle, simulating all driving conditions. So, how do you know if you have a failing ABS module? An Unresponsive Brake Pedal Your brake pedal may slowly become unresponsive over time.

This may be the sign of a deteriorating ABS module. Increased Pedal Effort With a fully functional braking system, the brake pedal needs minimal effort to slow the vehicle. Need to know more about brake pads? Speedometer Failure There are rare cases where an ABS control module failure affects the speedometer. Or better — get one to come to you. Car Care Advice.

Share this story:. RepairSmith RepairSmith is the easiest way to repair your car. Our ASE-certified technicians deliver quality car repair and maintenance directly to your driveway.